Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Singer 3116 Simple
Summary of Contents for Singer 3116 Simple
- Page 1 Instruction Manual Manual de Instrucciones Manuel d'Instruction...
- Page 18 Panasonic Co., Ltd.(TW) Panasonic Co., Ltd.(TW)
- Page 51 All overedge stitches are suitable for sewing and overcasting edges and visible seams in one operation. When overcasting, the needle should just go over the edge of the fabric.
- Page 57 If the stitches on the left side of the buttonhole are too close together, turn the dial to the left (+). * Turning dial to the left opens left side. If the stitches on the left side of the buttonhole are too open, turn the dial to the right ( ).
- Page 67 Set machine as illustrated on left. Set the stitch length dial to "1" - "1.5". This function is used to secure the tops of kick pleats, as well as pocket openings. First use a straight stitch across the top of the pocket or pleat. This seam should be approximately 1/4 to 1/2 of an inch long.
- Page 68 Cette fonction s'applique au plis et...
- Page 92 Lubricar como descripto.
- Page 94 021G2D0101( ) Dec/05 SINGER 3116(970CB4)
Need help?
Do you have a question about the 3116 Simple and is the answer not in the manual?
Questions and answers
Bobbin housing won’t rotate at all
The bobbin housing on the Singer 3116 Simple will not rotate if the bobbin winder spindle is pushed to the right in the "bobbin winding" position. In this position, the machine is set to wind the bobbin and will not sew; the hand wheel and internal mechanisms are disengaged. To resume sewing and allow the bobbin housing to rotate, push the bobbin winder spindle to the left (sewing position).
This answer is automatically generated
How do I sew forward, is sewing in reverse
To sew forward and reverse on the Singer 3116 Simple:
1. To secure the beginning and end of a seam, press down the reverse sewing lever (A).
2. Sew a few reverse stitches.
3. Release the lever, and the machine will sew forward again.
This answer is automatically generated
I need to alter how should i set the key
To adjust the stitch pattern on the Singer 3116 Simple sewing machine, use the pattern selector dial. For a straight stitch, select the " | " pattern and adjust the stitch length using the stitch length dial. For a zigzag stitch, select the " } " pattern and adjust the stitch length according to the fabric. To choose other patterns, turn the pattern selector dial to the desired stitch and adjust the stitch length as needed.
This answer is automatically generated
I am not able to move needle up or down. can not move hand switch. it was working and started hesitating while stitch but I did force to move needle up and down before opening up inside of machine.
The needle may not be moving up or down on the Singer 3116 Simple sewing machine due to one or more of the following reasons:
1. The needle is damaged – insert a new needle.
2. The needle is not correctly inserted – insert it with the flat side toward the back.
3. The machine may be jammed – remove the upper thread and bobbin case, turn the handwheel back and forth by hand, and remove the thread.
4. Lint or oil buildup on the hook or needle bar – clean the hook and feed dog as described.
5. The machine may require lubrication – lubricate as described.
Check these possible causes and fix them accordingly.
This answer is automatically generated
Machine is sewing in reverse continually
The Singer 3116 Simple sewing machine may be sewing in reverse continually because the reverse sewing lever is stuck or engaged. To fix this, check if the reverse lever is pressed down or jammed. If necessary, gently release it and ensure it moves freely. If the issue persists, the internal mechanism controlling the reverse function may need cleaning or repair.
This answer is automatically generated