Display, Buttons, Leds, Call Signalling, Pictographs And Signals - elmeg C300 Manual

1.6 Display, Buttons, LEDs, Call signalling, Pictographs
and signals
1.6.1 Display
Date
1st line
13.04.01 13:55
2nd line
tbook
S S S S
4 softkeys
Fig. 2
After you connect the system to the ISDN connection,
the date and time are shown on the top line of the dis-
play. The date and time are imported automatically
from the PABX system, or from the ISDN network
when you have successfully made a call. Terms are
displayed in capital and small letters on the first line.
The functions of the softkeys are displayed in capital
or small letters (depending on your settings) in the se-
cond line.
The text displayed for a function on line 2 is always lo-
cated above the corresponding softkey. When you
press the softkey, the next level is displayed.
1.6.2 Buttons
F
Function button: This key opens the pro-
gramming menu. If you are already loca-
ted in a menu and then press the key, eit-
her menu-specific functions are shown, or
you are moved back one programming
step.
E
Escape button: Pressing the Esc button during programming returns the tele-
phone to its idle status.
O
OK key: Pressing this button stores a setting in the telephone. You then hear
the acknowledgement signal.
Time
24 chars
}
vip quiet
4
Arrow: further menu items
accessible with arrow buttons
Text assignment to softkey
ˆ13.04.01 13:55
ˆtbook vip
ˆ Functions
ˆaudib adjust prog config
S S
ˆ Functions
ˆaudib adjust prog config
}
quiet
S S