Pictographs; Setting The Language Of The Display - elmeg CS410 Operating Instructions Manual

Pictographs

The pictographs (symbols) described as follows have been used in these operating instruc-
tions to illustrate some procedures for setting and using the telephone.
b
Lift up the handset or start initializing selection.
a
Replace handset. The telephone is idle.
l
A call is signaled. The ringing tone melody sounds.
g
You are conducting a call.
d
A three-party conference call is initiated.
q
You hear the positive or negative acknowledgement signal.
t
Select the number, code, character or text.
09
Press the appropriate button on the push-button set.
*#

Setting the language of the display

You can select the language of your display.
Begin as follows:
M
a
<>
Press the arrow buttons to view the available
languages.
s
Press the softkey adjacent to the desired
language. The display switches to the changed
language immediately.
8
s
Configuration
Description and Installation
s s
Display Language
ˆ Which language? }
ˆItaliano
Español
ˆDeutsch
English
ˆFrançaise
Nederland