elmeg C300 Manual page 89

4.6.12 Programming a function key
Configuring a function key is described in the following using key 2 as an example. If you
wish to configure further keys, or change a key that has already been programmed, pro-
ceed as described here for key 2.
If you wish to program a key of the key extension module, proceed as described on page
72.
Begin as follows:
F
a
<>
Use the arrow keys to select the desired
O
function.
In this example: »
Confirm your selection by pressing OK.
t
Enter the number of the ISDN access'
B-channel. Eingaben:
» 11 « = first B channel of the first ISDN ac-
cess.
» « = second B channel of the first ISDN
12
access.
» « = first B channel of the second ISDN
21
access etc.
In the example here: »
O
Confirm your entry by pressing OK.
S S
prog direct function
«.
line key
11 «.
83
S <>
Select direct
dial button
ˆFunction for key 2 ?
ˆline key
ˆ2 / line key
ˆnumber>11_
ˆ Prog. new function
ˆ2_:F line key-1/1
O
{}
{}