Table of Contents
Advertisement
Selective inhibit
The call control distinguishes between the entries in the enable list
»list«
and those in the inhibit list. You can release inhibited entries using the
enable list. If an entry in the enable list longer that an entry in the inhibit
list that entry can be dialed. (Example: Inhibited number 01234 and
enabled number 012345; Calls beginning with 01234 can not be di-
aled, only those beginning with 012345.)
Deactivate call control
»no«
The softkey »no« deactivates a configured call control.
Begin as follows:
F
a
S
To deactivate a configured call control,
press the softkey below »no«.
If you would like to activate call control,
press the softkey
»list«.
3.11.2 Enter the inhibited and enabled telephone numbers
Configuration and editing of inhibited number 1 are described in the following examples.
To configure or edit other inhibited/enabled numbers, proceed as described for inhibi-
ted number 1.
Begin as follows:
F
S
a
config
t
Enter the prefix, telephone number or
partial number that is to be inhibited.
In this example: »05171«.
S
>
config
»complete« or
>
S
inhibit
44
S
t
inhibit
Enter PIN
ˆ
Inhib. outgoing calls?
ˆ
no
ˆConfig. inhibit filter }
ˆ pin
O
S
t
Enter
list
PIN
ˆ Inhib./Enable tel. no.
ˆInhib-1>05171_
O
S
outgoing
complete list
list outgoing
<>
O
Select
entry
Advertisement
Table of Contents
