Telephone Bios - elmeg C300 Manual

Hide thumbs Also See for C300:
Table of Contents

Advertisement

t
Enter the number of the Server PC:
»05171901190«.
To cancel a download already in progress
press the softkey below »Abort« or the
E
button.
Under some circumstances all of the data in your phone may be deleted after a firmware
download. If this is the case, the following notice is given prior to starting the down -
load:»All data will be deleted Continue?«. The firmware download is started
only after you have confirmed this prompt by pressing the softkey below »ok«. If the
data for the telephone are not deleted during the download, the download is started
without first displaying the above prompt.
6.4

Telephone BIOS

This telephone is equipped with a BIOS (basic functions) in English. The BIOS functions
also remain available even if the firmware of the telephone does not operate properly, or
if new firmware was not loaded completely (e.g. if the PC crashed while loading the firm-
ware).
The following functions are available in the telephone's BIOS:
All phone calls are signaled. No number (MSN) has been entered in the
telephone.
Dialing of outgoing calls is possible after lifting the handset (no call prepa-
ration, no open listening or hands-free calling).
Loading new firmware via the RS232(V.24) port or via the ISDN connec-
tion.
Downloading new firmware via the RS232 port
To load new firmware in the BIOS of your telephone via the RS232(V.24) port, proceed
as described on page 114 of these operating instructions.
ˆPlease dial
ˆ
ˆPlease dial
ˆ05171901190
116
Abort

Advertisement

Table of Contents
loading

This manual is also suitable for:

Css300

Table of Contents