elmeg C300 Manual page 46

S
Press the softkey below»no« or »ok«.
Display (approx. 5 seconds) after pressing
the softkey below »no«.
Display (approx. 5 seconds) after pressing
the softkey below »ok«.
3.10.2 Display during call
The following displays are possible during a call:
Call display for phone number (»0123456«).
Call display for phone number »0123456«) and time
(»13:55«).
Call display for phone number (»0123456«) and du-
ration (»02.19«) of entire call.
Call display for phone number (»0123456«) and
charges (»0,36«).
Call display for date (»13.04.01«) and time
(»13:55«).
Correct charge display is shown only if you have applied at your network service
provider for transmission of charges during calls.
Attention: When using an LCR procedure the charges are not registered properly,
as they are not transmitted by all providers.
View during a call
The displays during calls described in the following depend on your individual set-
tings and can therefore be different for each connection.
ˆCalling subscriber numb?
ˆ no
ˆCalling subscriber get
ˆno
ˆCalling subscriber get
ˆ
ˆCall-Number transfer
ˆoutgoing
ˆ0123456
ˆdispl silent
ˆ0123456
ˆdispl silent
ˆ0123456
ˆdispl silent
ˆ0123456
ˆdispl silent
ˆ13.04.01
ˆdispl silent
40
ok
dial number!
dial number!
incoming
}
13:55 }
02.19 }
0,36 BP }
13:55 }