3.7
Setting the date and time
The system telephone automatically takes the time and date from the PABX system, or
from the external ISDN network. Nevertheless, you have the possibility to configure the
date and time manually.
Begin as follows:
F
a
t
Enter the time.
In this example: »1355«.
O
Confirm your entry by pressing OK.
t
Enter the date.
In this example: »130401«.
O
Confirm your entry by pressing OK.
3.8
Setting the User Interface
3.8.1
Setting the softkey display
You can configure the settings for the softkeys in the lower row of the display. You can
select whether you wish to have the letters for the softkeys shown in lower or upper
case. In the default state, softkey names are shown in lower case.
Begin as follows:
F
a
S
Press the softkey below »no« to have the
letters for the softkeys shown in lower
case. Press the softkey below »ok« to
have the letters for the softkeys shown in
upper case".
In this example: Letters for softkeys in up-
per case.
S
>
adjust
S
>
adjust
33
S
time
ˆ
Set time
ˆTime>13:55
ˆ
Set time
ˆDate>13.04.01
ˆ
Settings
ˆfilter tncall time
S
S
use
softkeys
ˆ
Softkey-Name large?
ˆ
no
{}
use
ok