4 Replacement Procedures
4. Pry up the logic upper assembly from the bottom edge and remove it as shown in Figure
4.19.
Installing the Logic Upper Assembly
Install the logic upper assembly according to the following procedures.
1. Seat the logic upper assembly from the back edge and adjust to the correct position. Snap
the logic upper assembly firmly into place.
2. Attach the three cables and secure the logic upper assembly with two M2.5x8 screws as
indicated in Figure 4.18.
3. Close the laptop and turn it upside down. Secure the logic upper assembly with thirteen
M2.5x8 screws as indicated in Figure 4.17.
Satellite A660/A665/A660D Maintenance Manual
Figure 4.19 Removing the logic upper assembly
4.8 Logic Upper Assembly
4-28