Operation - Sam4s SPS-500 Operation Manual

DISPLAY MESSAGES
Set Date & Time Is Deactivated
The option to program the date and time has been disabled within the program settings.
Employee Should Be Different
The employee entered to complete the sequence should not be the same as the employee Signed on.
Transfer Not Allowed
The attempt to transfer a check or clerk balance is not allowed at during the present operation.
Req Gallonage Amount
The product to be sold is programmed as a gallonage product and therefore requires the entry in gallonage format.
Available Only In Check
The attempted operation is only available when a check number is open and in use.
Split This Item Is Not Possible
Split pricing or split bill procedure has been attempted against a product which has this option disallowed.
Function Key Not Included
The function key selected is not allowed within this operation.
Error Post Tender
The post tender operation allows the calculation of change for a paid sales, this feature has been disabled or
operated incorrectly.
No Tracking Data In This Reg
An attempt to clear the check tracking sales data has been made from a register which is not set within the service
options to store the check tracking data.
No Time Keep Data In This Reg
An attempt to clear the employee time keeping data has been made from a register which is not set within the
service options to store the time clock data.
Multiplication Limit Exceed
The value entered is greater than the programmed multiplication maximum limit.
Tab Of Field 2 Too Big
The value entered during the programming of non PLU's (price inclusive barcodes) is incorrect.
Non PLU Code Range Over
The program value entered during non PLU's (price inclusive barcodes) has been entered incorrectly.
Tare Entry No Allowed
The attempt to enter the weight of packaging against a product is not allowed during the current operation.
Misc Tend Required
The miscellaneous tender function key is required as the next key sequence.
- 18 - SPS-500