Operation - Sam4s SPS-500 Operation Manual

DISPLAY MESSAGES
No Programmable Key
An attempt to re-program a fixed function key has been made.
X/Time Required
The x/time function is required during the present key sequence.
Time In Required
The register has enforced time clock entry before registration. The time clock entry must be completed before sales
can be made.
Sign On Required
The register, requires the entry of an employee number.
Memory Not Allocated
The file attempted to be utilised has no corresponding memory allocation.
This Emp Rpt Must Be Cleared
The employee report must be reset within the Z mode position before continuing.
Error Status
The program status of the attempted function or item is incorrect set, this must be re-programmed before the item
can be successful used.
Error Value
The value entered is not acceptable for this procedure.
Error System Option
The programmed system options are set incorrectly for the attempted procedure. For example a check or clerk
access has been attempted and the register storing the data has not been set within the service mode options.
Error Employee
The employee number settings are incorrect for the attempted procedure, or an attempt to change the employee mid
operation has been made.
Error Table No
The table number entered is not valid during the present procedure, enter an alternative table number
Scale Motion
The attached scale, position should be checked.
Over Weight
The item currently weighed is greater than the accepted weight.
Under Weight
The item currently weighed is less than the accepted weight.
Promo Not Allowed
The promotion function key has been disallowed for the current product or procedure
Waste Not Allowed
The wastage function key is not allowed during the current operation.
- 16 - SPS-500