Operation - Sam4s SPS-500 Operation Manual

DISPLAY MESSAGES
Paper End
The guest check printer has reached the end of the form, or the Receipt/Journal paper is at, or near, the end of its
roll.
Range Over
The number entered is out of range.
Remove Paper
Validation is complete and the paper must now be removed.
Sequence Error
The preceding key sequence is not allowed.
Single Item
This PLU has been programmed as a single item PLU and cannot be used within a sale.
Subtotal Required
The SUBTOTAL key must be depressed before continuing.
System Error
The register procedure attempted is not allowed, due to the fact the program code has not been set. For example,
opening of a check or clerk, where the service mode system option has not be set to determine the register storing
the sales data, correctly enter the required program codes.
Tare# Required
This PLU/scale item requires a tare (package) weight entry.
Tray Subtotal Required
This prompt appears while in a TRAY SUBTOTAL transaction. The operator must first press the TRAY
SUBTOTAL key before pressing any tender keys.
Validation Required
This operation requires the valid function key to be pressed to complete the compulsory settings.
Waste Required
The operator is in the middle of a waste operation, and must depress the WASTE key in order to complete the

operation.

Wrong Employee
The employee attempting to open this guest check is not the person who started the sale. Also appears when
attempting to sign on a new employee without first signing the current employee off, if overlap employee is not
programmed. Enter the correct employee code.
Sign Off Required
In order to complete this sequence the operator must sign off from the register.
Zero Amount
The register has been programmed to not allow negative sales.
Price Level Mismatch
The price level attempted in the sale, is not allocated to the PLU, check the price levels set against the PLU
programming
- 14 - SPS-500