Operation - Sam4s SPS-500 Operation Manual

DISPLAY MESSAGES
Decimal Entry Not Allowed
The decimal function is used for multiplication entries, an attempt has been made to use the decimal key within an
incorrect sequence
Split Pricing Not Allowed
The multiplication key has the ability to carry out fractional entries, for split pricing, this feature is not allowed during
this current operation or has been disabled
Void Mode Is Deactivated
Access to the void mode has been restricted within the program system options.
Job Change Required
The current clocked on job code, is required to be changed using the time clock entry.
Job Code Change Not Allowed
The job code change attempted during the time clock procedure is not allowed.
Push Button Entry Required
The employee sign on has been attempted without using the EMPLOYEE 1 – 10 push button functions.
Tendering Is Not Allowed
Sale finalization using a tender key has been attempted, however the procedure is disallowed during the current

operation.

Over Regular Hours Per Week
The employee time logged onto the system is over the predefined number of hours per week.
Must <= Line# Per Transact
An attempt to enter the number of lines per check greater than the number of lines per transaction has been made
during memory allocation programming.
Must >= Line# Per Soft Check
An attempt to enter the number of lines per transaction less than the number of lines per check has been made
during memory allocation programming.
No Stock PLU
The product selected for stock maintenance has not been defined as an inventory PLU within the PLU status group
settings.
Negative Card
It is not possible to enter a negative balance to the smart card.
Linked Status Required
The product requires a status group program setting.
Error – Slip Paper
The paper should be inserted into the external loose-leaf paper printer before attempting this operation.
Local Printer Required
This procedure requires the programming of a printer physically connected to the register.
Mode Error
The mode lock key has been changed mid operation, return to the correct mode position.
- 17 - SPS-500