Standard Disassembly Drawings - Samsung DMT800 SERIES Service Manual

3. Disassembly and Reassembly

3-2. Standard Disassembly Drawings

Throughout this manual, features and appearance may vary from your model.
Warning
Always disconnect the electric power supply & water supply before servicing any electrical component, making
ohmmeter checks, or replacing any parts.
Caution
Before moving the unit, laying it down for service, or removing any parts for service be sure to drain as much of the water
from the unit as possible. Use a protective mat or towel to prevent damage to the floor or having any of the remaining
water spill on the floor.
All voltage checks should be made with a voltmeter having a full scale range of 250 volts or higher. After service is
completed, be sure all safety grounding circuits are complete, all electrical connections are secure, and all access
panels are in place.
Before servicing, make sure to remove all items include baskets inside dishwasher.
Part
This dishwasher use 2 kinds terminal type.
Terminal
- Fasten type
- P-Lock type
Remove the
Terminal
- P-Lock type
Remove the
Terminal
- Fasten type
3-2
Photo
Fasten type
Buckle
P-Lock type P-Lock type
1. Terminal with buckle.
2. Press the buckle, and pull out the terminal.
* P-lock type for drain pump.
1. Use the proper tool to firmly insert or remove
the "fasten" type terminals on the Main PCB, the
dispenser "rinse aid" level sensor, and the heater.
Hold both sides of the connection to prevent bending
the terminals or breaking the PCB.
Description
Fasten type