Dry Is Not Satisfied - Samsung DMT800 SERIES Service Manual

Hide thumbs Also See for DMT800 SERIES:
Table of Contents

Advertisement

Error type
Error mode
Dry is not satisfied.
None
4-17
Checking Method
1. Check whether Rinse Refill LED light or not.
2. Check the wire connections for the Dry Fan Motor.
3. Check the resistance of the Dry Fan Motor coil.
(Remove the connector before measuring.)
Normal: Approx. 80 Ω
4. Check the resistance of the Thermal Actuator.
(Remove the connector before measuring.)
Normal: Approx. 73 Ω
5. Check the operation of the Dry Fan Motor Relay
: Check the operating voltage between the yellow wire of the
C101 connector and the sky wire of the CN201 connector.
Normal: 120V (while operating)
6. Check the operation of the dispenser.
If rinse aids are not dispensed, a dry error may occur.
Because the dishes are heated and heat dried during the last
drying cycle, the dried state of plastic dishes may not be
optimal
Corrective actions
- If Rinse Refill LED light, refill rinse in Dispenser.
- Reconnect the Dry Fan Motor connectors.
- Faulty: Replace the Dry Fan Motor assy.
- Faulty: Replace the Main PBA assy.
- Check voltage
- Faulty: Replace the Main PBA assy.
- Remove retainer.
- Check voltage.
- See "Detergent is not dispensed"
4. Troubleshooting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmt700 seriesDmt400 series

Table of Contents