Frame Front; Door Lock Switch (Door Latch) - Samsung DMT800 SERIES Service Manual

3. Disassembly and Reassembly
Part

Frame front

Door Lock Switch
(Door latch)
Reassembly is in the reverse order of the removal.
3-4
Photo Description
Preparation:
* Make sure to disconnect the power.
* Remove the lower basket in the dishwasher.
* Cover the Assy sump with towel for prevent losing
screws.
1. Open the door completely.
Remove the 12 screws holding the tub front,
frame front, and control panel in place.
Before removing it, place a cushioned mat on the
floor to prevent being scratched.
After removing screws, make sure to hold the tub
front using your hand. It can prevent closing door
suddenly and harming you.
Caution
Do not place the removed screws on the tub front.
They may fall into the sump assy.
2. Pull out the Frame front & the Assy control panel
carefully.
3. Remove the Assy control panel from Frame front. (
Pull out just a little and push down it.)
Preparation:
* Disassemble the frame front.
1. When removing the door latch, lift up the door latch
which is fixed by two hooks.
Use a flat screwdriver to remove it.
2. Release the micro switch.