3.2. Standard Disassembly Drawings
3.2.1. Themistor
1. Place the dishwasher on its back so that you can see the
base. Remove the two (2) screws that hold the base and
the shutter in place.
2. Remove the leakage sensor connector (white) inside
the shutter.
Copyright© 1995-2010 SAMSUNG. All rights reserved.
3. Disconnect the wire terminal (blue) connected to the
thermistor.
4. Check the location of the thermistor and remove the two
(2) screws that hold the thermistor to the case sump.
3. Disassembly and Reassembly
3-2