Part
Base
Reassembly is in the reverse order of the removal.
Photo
3. Disassembly and Reassembly
Description
Preparation:
*
Disassemble the frame L/R and the shutter.
- Refer the each disassembly section.
1. Remove the six (6) screws of the base plate both-
side. (in Red circle)
2. Lay down the dishwasher on its back carefully.
3. Remove the cover PCB and pull out case PCB with
disconnecting wire connectors.
4. Disconnect the wire connectors from Assy Sump.
5. Pull out the base plate to downside slightly.
6. If need, remove other parts.
Ex. Main wire-harness. Hoses.
3-21