Assy Sump - Samsung DMT800 SERIES Service Manual

3. Disassembly and Reassembly
Part

Assy Sump

Reassembly is in the reverse order of the removal.
3-20
Photo Description
Preparation:
* Disassemble the baskets, nozzles, duct nozzle &
storm wash nozzle.
* Disassemble the frame left & the shutter & bracket
front lower.
- Refer the each disassembly section.
1. Remove the parts which are connected with Assy
sump.
- connectors, drain pump, screws
2. Remove the three (3) screws & holders in Assy
sump.
Pull out the holder outside using long-nose pressing
the hook using driver.
3. Push the Assy sump using your hands toward the
inside carefully.
Caution
Make sure to remove remain water in the
dishwasher. If not, wet the floor.