3. Disassembly and Reassembly
3-2. Standard Disassembly Drawings
Part
Thermistor
3-2
All manuals and user guides at all-guides.com
Photo
1. Place the dishwasher on its back so that you can
2. Remove the leakage sensor connector (white) inside
3. Disconnect the wire terminal (blue) connected to the
4. Check the location of the thermistor and remove the
Description
see the base. Remove the two (2) screws that hold
the base and the shutter in place.
the shutter.
thermistor.
two (2) screws that hold the thermistor to the case
sump.