Door Overlay Installation; Positioning The Stove - Osburn 2000 Owner's Manual

Freestanding wood stove

Hide thumbs Also See for OSBURN 2000:

Table of Contents

1.1.2 Door overlay installation

In order to complete the assembly of your freestanding Osburn 2000 wood stove, you need to

install the door overlay. See table 1.1.3 below for installation instructions :

1- Position the overlay on the door frame and fix it in place from behind using the 4 screws.

Note: It is not necessary to remove the glass or any other component to install the overlay.

Table 1.1.3 Door overlay installation

1.2

It is very important to position the wood stove in an area that will favour the most efficient heat

distribution throughout the house. The stove should therefore be installed in the room where the

most time is spent, and in the most spacious room possible. Recall that wood stoves produce

radiating heat, the heat we feel when we are close to a wood stove. A wood stove also functions by

convection, that is through the displacement of hot air accelerated upwards and its replacement with

cooler air at the floor level. The stove's convection effect is facilitated by the installation of a

blower.

Table of Contents