Osburn 2000 Owner's Manual page 16

Typical installation through the wall
Wall support system
If your chimney must rise along an outside wall, you need to connect it to your stove through an
adjacent wall. For this type of installation, the following items are normally required :
Chimney
Suitable lengths of chimney (enough to go up to your roof)
An adjustable wall support
A wall thimble
An adequate number of wall bands (one for every 8 feet of chimney, excluding the roof portion)
A stove pipe adapter
One insulated tee & plug
A roof flashing kit (if necessary)
A chimney cap.
Roof guys (if required)
Stove pipe
An adequate number of stove pipe sections.
o
A 90 elbow
FIGURE 2.2.1 (A) Typical installation through the wall
15