The Advantage Of A Blower (Fan) - Osburn 2000 Owner's Manual

2.6

THE ADVANTAGE OF A BLOWER (FAN)

A blower is installed at the back of your Osburn 2000 wood stove. This is necessary to redistribute
into a room the heat trapped at the back of your stove. By forcing hot air toward the front, the blower
enables you to extend the radiation power of your stove.
You can also install a thermodisc to enable the blower to start or stop automatically when the stove is
hot or too cold. The thermodisc part number is AC05530 for a basic model and ACO2055 for a quick
connect model. Installation instructions are supplied with the blower and the thermodisc.
23