CHAPTER 7: PART REPlACEMENT GUIDE
7.10 UPPER SEAT fRAME REPlACEMENT
1) Remove the seat pad as outlined in Section 7.7.
2) Remove the 4 screws holding the upper seat frame to the lower seat frame (figure A).
3) Disconnect the HR handlebar wire (figure B).
4) Remove the upper seat frame (figure C shown with back pad and HR handlebar also removed).
5) Reverse Steps 1-4 to install a new upper seat frame. NoTE: The HR handlebar wire must be hooked up prior to installing the screws from the upper
seat frame to the lower seat frame.
fIGURE B
fIGURE A
fIGURE C
36