Scan command barcode(s) to quickly configure the CHS.
Make sure the CHS is not connected to a device before scanning a
command barcode! See page 12 for unpairing instructions.
For a complete set of command barcodes, download the Command Barcodes
Sheet:
http://www.socketmobile.com/support/downloads
The web link is also provided in the below QR Code. To open the web page,
scan this QR Code using a QR Code Reader App in your device.
Important! Make sure the CHS is not connected to a host computer or device
before scanning a command barcode!
HID-Keyboard (default)
Configures the CHS to Human
Interface Device (HID) mode as
a Keyboard class device.
SPP Mode
Changes the CHS to Serial Port
Profile (SPP) mode.
iOS Mode
Changes the CHS to iOS mode.
Bluetooth Connection Modes
COMMAND BARCODES
13