Command Barcodes - Socket CX2895-1508 Quick Start Manual

COMMAND BARCODES

Scan command barcode(s) to quickly configure the CHS.
Make sure the CHS is not connected to a device before scanning a
command barcode! See page 20 for unpairing instructions.
for a complete set of command barcodes, download the Command
Barcodes Sheet: http://www.socketmobile.com/support/downloads
The web link is also provided in the below QR Code. To open the web
page, scan this QR Code using a QR Code Reader App in your iOS device.
22
Important! Make sure the CHS is not connected to a host computer or
device before scanning a command barcode!
Bluetooth Connection Modes
HID-keyboard (default)
Configures the CHS to Human
Interface Device (HID) mode
as a Keyboard class device.
SPP mode
Changes the CHS to Serial
Port Profile (SPP) mode.
iOS mode
Changes the CHS to iOS
mode.
COMMAND BARCODES (CONTINUED)
23