Status
Bluetooth
Good Read
Battery Status
Beep Pattern
Low-high tone
High-low tone
1 low beep
1 beep
1 beep with
Green LED blink
2 beeps, same
tone
1 long beep
3 beeps with
escalating tone
3 beeps with
escalating tone
followed by a
long tone
LED Activity
1 Blue blink every
second
1 Blue blink every 3
seconds
Green Constant
(while scanning)
Red Blinking
(while scanning and no
AC power)
Red Constant
(while AC power)
Off (no light)
(while AC power)
Off (no light)
(while no AC power)
Meaning
Power On
Power Off
Keyboard Pop-up Enable
CHS connected to device and ready to scan barcodes.
Data successfully scanned.
CHS disconnected from device.
CHS tried multiple times unsuccessfully to connect to the
last device it paired with. After 5 minutes the CHS will
power off.
CHS recognized the Command Barcode and implemented
the change.
CHS recognized the Command Barcode, but could not
implement the change. Verify the Command Barcode is
valid and retry.
STATUS INDICATORS
Meaning
Bluetooth is On but not
connected.
CHS is connected to device.
Data successfully scanned.
20% or less battery capacity
remaining.
Battery is charging.
Battery is fully charged.
CHS is Off.
15