General Command Barcodes - Socket 7Qi Manual

GENERAL COMMAND BARCODES

INSTRUCTIONS: Scan command barcode(s) to quickly configure the barcode scanner.
Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated
by the header row of each table.
All Bluetooth Connection Modes OK
Scan only with CHS in SPP or iOS Mode
Scan only with CHS in HID Mode
Symbologies
Make sure the CHS is not connected to a host computer or device before scanning a
command barcode!
To use the CHS on multiple hosts, perform the unpair sequence.
1. Power on the CHS.
2. Press and hold down the trigger button.
3. Press and hold down the power button.
4. After you hear 3 beeps, release both buttons.
By default, the CHS is in HID mode as a Keyboard device.
For scanners in Bluetooth SPP or iOS mode, you can alternatively configure some settings by using
the Scanner Settings app. You can download the app from iTunes, and
3
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • +49 9401 9333-0 • info@ime.de • www.ime.de
www.ime.de
Google Play.