Bluetooth Unpairing - Socket CHS 7Mi Quick Start Manual

BLUETOOTH UNPAIRING

Note: This procedure will put the CHS in discoverable mode.
Step 1: Unpairing the CHS: Delete the Bluetooth Pairing
If the CHS is paired with a device, unpair it before trying to connect to a
different device.
1. Power on the CHS.
2. Press and hold down the trigger and power button.
3. After you hear 3 beeps, release both buttons.
The CHS will unpair and automatically power off. The next time you power on
the CHS, it will be discoverable.
Step 2: Remove the CHS from the Bluetooth list on the host device
Important: Both steps above must be done to complete the unpairing.
12