Aux Menu Overview - AIRTRONICS MT-S User Manual

MT- S
Telemetry System with Sanwa Synchronized Link Support
2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
FUNC MENU ( TRIM, ANTI-LOCK BRAKE, THROTTLE OFFSET AND THROTTLE TYPE )
TH TYPE MENU [ Throttle Type ]
Selecting the Menu and Channel:
1) From within the SETTING menu, press the UP or DOWN keys to highlight the FUNC
menu. FUNC ST TRIM 0 will be highlighted.
If the cursor is flashing over Channel/Options, press the ENTER key to stop the
cursor flashing, then press the UP or DOWN keys to select the FUNC menu.
2) Press the BACK key so that the cursor is flashing over Channel/Options.
3) Press the UP or DOWN keys to highlight the Throttle channel, then press the ENTER key.
Changing the Throttle Type Value:
1) Press the DOWN key to highlight TH TYPE F7:B3.
2) Press the ENTER key, then press the UP or DOWN keys to choose the desired
Throttle Type value.
FUNC TH TYPE setting range is F7:B3 and F5:B5. The default setting is F7:B3.
3) Press the ENTER key. Either Set to F70:B30? NO/YES will be displayed or Set to
F50:B50? NO/YES will be displayed. Press the UP or DOWN keys to highlight YES,
then press the ENTER key.
If you want to go back and change the Throttle Type or if you don't want to
change the Throttle Type for any reason, choose NO or press the BACK key.

AUX MENU OVERVIEW

To access the various AUX menu Programming Menus, turn the transmitter ON,
then press the ENTER key to open the PROGRAMMING screen.
Press the UP or DOWN keys to highlight the AUX menu, then press the ENTER
key to open the AUX menu.
The following Programming Menus are available within the AUX menu:
MENU
STEP
POINT
4WS
MOA
AUX MIX
CODE
Program Step Values That the Auxiliary Servo Travels
Program Specific Points That the Auxiliary Servo Travels
Program Four Wheel Steering Options
Program Dual Throttle Options (Dig and Burn)
Program Auxiliary 1 (Channel 3) and Auxiliary 2 (Channel 4) Mixing Options
Program CODE Auxiliary Options to Control SSL Accessories (Super Vortex ZERO, etc.)
MENU DESCRIPTION
SETTING
AUX
PAGE #
PG. 32
PG. 33
PG. 35
PG. 37
PG. 39
PG. 40
31
Section Continued on Next Page