Setup Wizard (Car Type Templates) - AIRTRONICS MT-S User Manual

MT- S
Telemetry System with Sanwa Synchronized Link Support
2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
SETUP WIZARD ( CAR TYPE TEMPLATES )
The Setup Wizard allows you to quickly and easily program the transmitter based on the type of model you're driving. Eight
Car Type Templates are provided. When a Car Type Template is selected, functions are automatically Assigned to the correct
channel and to the Auxiliary Switches and Trim Switches. This takes the guess-work out of setting up more complex models.
For example, if your Rock Crawler features Front and Rear Steering servos and Front and Rear Motors, choosing the CRAWLER
4WS/MOA Car Type Template will automatically program the transmitter for Four Wheel Steering Mixing and Motor on Axle
Mixing. In addition, various functions will be Assigned to the Auxiliary Switches and Trim Switches. The Setup Wizard will also
display what receiver channel ports to plug the servos into since this will vary depending on the Car Type Template chosen.
After choosing the desired Car Type Template, you can then choose the desired Modulation Type of your receiver, choose the
desired Channel Response Mode for each of the four channels, then Bind the transmitter and receiver. After Binding, you can
then change Servo Reversing, Sub-Trim and EPA programming values to finish the Setup Wizard.
WARNING: the Setup Wizard is designed to be used when setting up a new model and should be done prior to making any
programming changes to your model. When you run the Setup Wizard, all Programming Data (including custom Programming
Data) for the selected model will be LOST!
For detailed information about specific programming options that can be changed through the Setup Wizard, such as
Binding the transmitter and receiver, Modulation Type, Channel Response Mode, Servo Reversing, etc., please refer to
those specific sections in this User's Guide.
Starting the Setup Wizard and Choosing a Car Type Template:
1) Turn the transmitter OFF.
2) Press and HOLD the ENTER key, then turn the transmitter ON to open the Setup
Wizard.
3) Press the ENTER key to start the Setup Wizard and open the SELECT MODEL menu.
4) Press the UP or DOWN keys to highlight the model you would like to set up.
5) Press the ENTER key. Select this model? NO/YES will be displayed. Press the UP or
DOWN keys to highlight YES, then press the ENTER key to open the SELECT CAR
TYPE menu.
If you want to go back and select a different model or you don't want to create
the new Car Type Template for any reason, choose NO or press the BACK key.
6) Press the UP or DOWN keys to select the Car Type that matches the type of model
you're setting up, for example, CRAWLER 4WS/MOA. What channel ports to plug
the servos into your receiver and what functions will be controlled by what Auxiliary
Switches and Trim Switches will be displayed.
7) Press the ENTER key. INITIALIZE? NO/YES will be displayed. Press the UP or DOWN
keys to highlight YES, then press the ENTER key. INITIALIZING will flash momentarily,
then the RF MODE SET menu will open.
If you want to go back and select a different Car Type Template or you don't want to create the new Car Type Template
for any reason, choose NO or press the BACK key before Initializing.
Changing the Modulation Type, Channel Response Mode and Binding:
1) After selecting the Car Type Template, the RF MODE SET menu will be open. Press
the UP or DOWN keys to select the desired Modulation Type, then press the ENTER
key. The RESPONSE MODE menu will open. The Modulation Type should match
the Modulation Type of the receiver you're using!
GENERAL
15
Section Continued on Next Page