Fuji Xerox DocuColor 1256 GA Series Manual page 60

3.4 Changing the Paper Tray Size
G Do not load different types of paper
in the same tray. This may result in
paper jam.
G Do not load paper beyond the
maximum fill line found at the side of
the paper tray.
3
G Change the paper type if it is
different from that prior to the
change of paper size. The paper
type setting has to be done by the
adminstrator. See "3.2 Checking/
Changing Paper Supply Settings" on
how to change the paper size setting.
44
Load and align the paper
to the bottom left corner
with the side where
image is to be copied
facing downward.
Adjust levers A and B
respectively so that they
gently touch the edge of
the paper stock.
You will hear a click sound if the
guide is adjusted to the correct
position.
Paste the paper size
label on the front of the
tray.
Push in the tray slowly
until it stops.
Select More... in Paper Supply from the Basic Features
screen. Check that the correct paper size is displayed.
If the changed paper size is not displayed, repeat Step 6 and check that
levers A and B have been moved to the correct positions.