Installation - thomann Millenium HD-50 User Manual

Installation

6 Installation
Set-up and cabling
Connecting the bass-drum pedal and
the hi-hat controller to the drum
module
Hi-hat controller
Connecting the pads
Connecting the power supply
12
Set up the pads and cymbals according to your needs. In a next step, the drum
module needs to be connected to the rear of the bottom case and and all triggers
need to be cabled with the drum module. Please observe the labelling on the rear of
the drum module and the labelling on the individual cable ends. Finally check that all
cables between the pads and the drum module have been properly connected.
Connect the CONNECT TO BASE (10) terminal on the rear of the drum module with
the CONNECT TO MODULE terminal on the rear of the bottom case using the
included 6-pole cable in order to connect the bass-drum pedal and the hi-hat con‐
troller to the drum module.
You produce a closed hi-hat sound when you pedal the hi-hat controller while
n
hitting the hi-hat
You produce an open hi-hat sound when you do not pedal the hi-hat controller
n
while hitting the hi-hat
You produce the hi-hat pedal sound when pedalling the hi-hat controller directly
n
without hitting the hi-hat
An open hi-hat sound changes smoothly to a closed hi-hat sound when you
n
pedal the hi-hat controller while hitting the hi-hat.
Connect the included pad cables to the corresponding RIDE, CRASH, HI-HAT and
SNARE inputs on the rear of the drum module. The cables have different lengths.
Each cable is labelled on both ends with the corresponding pad designation.
Connect the included power supply unit to the DC 9V input on the rear of the
bottom case and then insert the power plug into the socket outlet.
e-drum set