Assembly - thomann Millenium HD-50 User Manual

5

Assembly

Loosen the wing nuts on the holder clamps before inserting the tubes. Mount the
various elements in the specified sequence as shown in the illustration below.
1.
Put the bottom case with the bass-drum pedal and the hi-hat controller (1) on
the floor. Insert the two stand tubes (2, with snare drum support) and (3) and
tighten the wing nuts on the holder clamps.
2.
Insert the drum module with the three toms (4) into the stand tubes (2) and (3)
and tighten the holder clamps on the wing nuts.
3.
Insert the two longer cymbal holders (5) and (6) for the ride and crash cymbals
and the shorter hi-hat holder (7) into the guides provided as shown in the illus‐
tration and tighten the wing nuts on the holder clamps.
HD-50
Assembly
9