Table of Contents
Advertisement
7
Installation
Set-up and cabling
Hi-hat controller
Connecting the power adapter
Set up the pads and cymbals according to your needs. Connect the drum module at
the back of the stand and wire all triggers to the drum module. Please observe the
labelling on the rear of the drum module and the labelling on the individual cable
ends. Finally check that all cables between the pads and the drum module have been
properly connected.
You produce a closed hi-hat sound when you pedal the hi-hat controller while
n
hitting the hi-hat
You produce an open hi-hat sound when you do not pedal the hi-hat controller
n
while hitting the hi-hat
You produce the hi-hat pedal sound when pedalling the hi-hat controller directly
n
without hitting the hi-hat
An open hi-hat sound changes smoothly to a closed hi-hat sound when you
n
pedal the hi-hat controller while hitting the hi-hat.
Connect the included power supply unit to the DC 9V input on the rear of the
bottom case and then insert the power plug into the socket outlet.
HD-17 Mako
Installation
15
Advertisement
Table of Contents
