Factory Settings - thomann Millenium HD-50 User Manual

Operation
TEMPO/TAP button

8.2 Factory settings

8.2.1 Resetting to factory defaults
20
3. Song volume
In the SONG mode, press and hold [SONG], then use the [+] or [–] buttons to
select the song volume. Value range: '000' to '032' .
There are two way you can adjust the tempo using the [TEMPO/TAP] button:
1. Press [TEMPO/TAP]. The LED display shows the currently set tempo that you
can adjust by means of the [+] or [–] buttons. Value range: '020' to '240' .
2.
Press and hold [TEMPO/TAP] for two seconds to enter the TAP mode. The LED
display is flashing.
Hit four times rhythmically on a pad to change the tempo. The value is deter‐
mined by the time interval between the last two hits.
To reset the drum module to its factory defaults, do the following:
1. Use the POWER ON/OFF switch on the rear of the bottom case to switch off the
drum module.
2.
Press and hold the [+] and [–] buttons on the drum module simultaneously
with one hand an turn on the drum module using the POWER ON/OFF switch
on the rear of the bottom case.
This will reset your drum module to the factory defaults and delete all your set‐
tings.
e-drum set