thomann Millenium HD-50 User Manual page 21

8.2.2 Setup mode
In this setup mode, you can adjust some global parameters according to your wishes
and expectations. To enter the setup mode, switch off the drum module, then press
and hold [KIT] while you switch it on again.
1. Press [TEMPO/TAP] and use the [+] or [–] buttons to set the sensitivity. Value
range: '001' to '008' .
2. Press [KIT] and use the [+] or [–] buttons to set the trigger threshold. Value
range: '001' to '050' .
3. Press [SONG] and use the [+] or [–] buttons to set the velocity curve. There are
four possible settings: 'NORM' (normal), 'DYNM' (dynamic) 'EASY' and 'FIXD'
(fixed).
HD-50
Operation
21