Installation - thomann HITMAN HD-30 Marauder User Manual

Installation

6 Installation
Set-up and cabling
Hi-hat controller
Connecting the power adapter
Connecting USB devices
Connecting audio devices
14
Set up the pads and cymbals according to your needs. Connect the cable harness to
the interface on the bottom and the cables from the crash cymbal pad and the tom
pads to the side of the drum module. Wire all triggers to the pads, cymbals and the
bass drum. Please observe the labelling on the drum module and the labelling on the
individual cables. Finally check that all cables between the pads and the drum
module have been properly connected.
n You produce a closed hi-hat sound when you pedal the hi-hat controller while
hitting the hi-hat
n You produce an open hi-hat sound when you do not pedal the hi-hat controller
while hitting the hi-hat
You produce the hi-hat pedal sound when pedalling the hi-hat controller directly
n
without hitting the hi-hat
An open hi-hat sound changes smoothly to a closed hi-hat sound when you
n
pedal the hi-hat controller while hitting the hi-hat.
Connect the included power supply unit to the DC 9 V input on the rear panel of the
drum module and then put the power plug into the power outlet.
Connect your computer, tablet or smartphone to the USB port on the rear panel of
the drum module.
Connect audio devices like CD or MP3 player etc. to the [AUX IN] input socket on the
rear panel of the drum module.
e-drum set