Installation - thomann Millenium MPS-450 User Manual

Installation

4 Installation
Setup, connecting pads and pedals
Connecting the power supply
Connecting headphones
Connecting audio devices
Connecting a CD or MP3 player
Connecting MIDI devices
Connecting USB devices
Connecting additional pads
MPS-450
8
E-Drum Module
Setup and assembly of the pads and pedals are described in detail in the enclosed
assembly instructions. Finally check that all cables between the pads and the e-drum
module have been properly connected.
Connect the included power supply to the 9-V input of the e-drum module. Then
plug the mains plug into the socket.
Connect your stereo headphones to the [PHONES] output of the drum module.
Connect the inputs of your amplifier or active monitor to the [OUTPUT] sockets of the
drum module. If you are using a mono amplifier, connect its input to the [L/MONO]
output socket of the module.
Connect a CD or MP3 player to the [AUX IN] input socket of the drum module.
Connect external MIDI devices to the [MIDI OUT] socket of the drum module.
Connect external MIDI devices or your computer to the USB port of the drum
module.
Use a current operating system still supported by the provider to avoid tech‐
nical difficulties.
Connect an additional crash or tom pad to the [Crash 2] or [Tom 4] jack sockets.