Canon dp-v3010 Instruction Manual page 65

Item
Display Name
Date/Time
Power Indicator Brightness Adjusts the brightness of the power indicator on the main unit. 5 is the brightest.
Compatible Settings
ACES
Firmware Update
Protect Settings
Password
Protect Target
Protect
Controller Settings
Knob Lock
Display List
Setting Options (underline indicates factory default)
Sets the name of the main unit. You can input up to 16 alphanumeric characters.
Sets the year/month/date/hour/minute.
Off, 1 to 5 (2)
Sets the version of ACESproxy.
0.7, 1.0
This function is used to update the video display firmware. Refer to the Canon website for detailed
information.
Locks the settings so they cannot be changed. When you press the MENU button, "Signal/System
Information" appears, but other operations are grayed out because they are locked.
• Unlocking Protect Settings
Move the selection frame to "Protect Settings" and press the SET button for approximately
3 seconds. When a password has been set, enter the password and select "OK".
Set a password to protect settings. Use a four-digit number (0000 to 9999).
You can remove Picture Mode and Select Channel from the items to be protected.
Picture Mode: Select "On" to protect or "Off" to exclude settings for "Picture Mode".
On, Off
Select Channel: Select "On" to protect or "Off" to exclude settings for "Select Channel".
On, Off
Select "OK" to protect. When a password has been set, enter the password and select "OK".
Configures settings for the display controller.
Locks the SHARPNESS, CHROMA, BRIGHTNESS, and CONTRAST knobs and RESET buttons on
the display controller when the OSD menu is closed (also applied when CDL is selected). Also set
using the F10 button on the display controller (
On, Off
Displays the list of displays registered to the display controller. You can delete displays or change
their listed order when two or more displays are recognized.
Delete: Delete the registered displays.
Switch: Change F button (F1 to F10) that registered the display.
64).
OSD Menu 65