Using The Channel (Ch) Button; Checking Signal Information And Status Of The Main Unit - Canon dp-v3010 Instruction Manual

Using the Channel (CH) Button

You can assign channels (various settings related to input signal) to the CH buttons on the display controller and switch
channels instantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings"→"Function/Channel Button"→"Controller Channel" and press the SET button.
A new window opens and displays button names CH1 to CH4.
3. Select a button name with the
The selection frame moves to next OSD menu level.
4. Select the channel to assign with
See "Channel Settings" (
5. Press the SET button.
The setting is confirmed.
The channel buttons on the display controller are preset with the following factory defaults.
Input Configuration
Select Input Signal
Format
Internal Sync
Channel Name
Picture Mode
Color Range

Checking Signal Information and Status of the Main Unit

The video display is equipped with a banner function which displays signal information or the status of the main unit.
1. Press the SET button when the OSD menu is closed.
The channel name, signal information, and status of the main unit will be displayed in the banner. It will automatically
disappear after 6 seconds.
Note
• For more detailed signal information, please refer to the section on "Signal Information" (
• The "Detecting sync." banner will continue to appear until the input signal is synchronized.
buttons and press the SET button.
.
49) for the configurable settings.
CH1
3G/HD-SDI 1
Automatic
Automatic
Off
(Blank)
DCI-P3
Automatic
CH2 CH3
3G/HD-SDI 2 Dual Link
HD-SDI
Automatic Automatic
Automatic Automatic
Off Off
(Blank) (Blank)
DCI-P3 DCI-P3
Automatic Automatic
Operating the Display Controller
CH4
DisplayPort
Automatic
Automatic
Off
(Blank)
DCI-P3
Automatic
68).
27