Table of Contents
Advertisement
Hardware error
Backlight error.
Fan error.
Panel error.
I/F error.
System error.
Input signal
No Signal
Unsupported
"Input Configuration" is different from Payload.
Operation
Invalid operation.
"Protect Settings" is on.
"CDL Bypass" is on.
Invalid Password.
"Knob Lock" is on.
USB memory
USB memory is not connected.
Unsupported USB memory.
90
Error Messages
Message
Description and Action
Turn off the main power once and then back on.
If the message persists, contact Canon Customer
Center.
Displayed when there is no video signal input.
Unsupported video signal is input. Check the
supported signal format (
Check the "Input Configuration" (
Information" (
68) settings. Reset any incorrect
"Input Configuration" settings.
Operation is disabled. Check the setting items.
To use the OSD menu, move the selection frame
to "Protect Settings" and press the SET button for
approximately 3 seconds.
When "CDL Bypass" is turned "On", you cannot
adjust the "Power", "Saturation", "Offset", or "Slope".
Enter the correct password.
If the knobs are not functioning, please set "Knob
Lock" to "Off".
Correctly connect the USB memory to the USB port
of this main unit.
Check the USB memory format and make sure it is
not protected.
72).
49) and "Signal
Advertisement
Table of Contents
