Table of Contents
Advertisement
■ Interface
Left side
7
8
9
A q
A a
A s
A d
A f
7A a 3G/HD-SDI input
terminal 1
8A s 3G/HD-SDI
output terminal 1
9A d 3G/HD-SDI input
terminal 2
A q A f 3G/HD-SDI
output terminal 2
CAUTION
• When connecting an external sensor for calibration to the USB port, cable length must not exceed 3 m. Otherwise,
communication error may occur and correct calibration may not be possible.
• Directly connect external sensors without using a hub.
• For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when
connecting peripheral devices.
Note
• Dual Link HD-SDI is used for connecting two input systems (
• Both FAT16 and FAT32 USB memory devices are supported.
• Proper operation cannot be guaranteed for all USB memories.
• It may take 10 seconds or more for the USB memory to be recognized. If a USB memory is used during recognition, the
message "Detecting USB memory." is displayed.
12
Nomenclature
Two input systems
corresponding to input 1.
Monitor output
corresponding to 7A a
Two input systems
corresponding to input 2.
Monitor output
corresponding to 9A d
Right side
LAN (10/100
A g
BASE) terminal
USB port
A h
DisplayPort input
A j
terminal
17)
A g
A h
A j
Connects to display
controller.
The main unit connects
1 to 1 with the display
controller. It can also be
connected via a hub.
Used to connect an
external sensor for
calibration (
31), USB
memory, hub, or controller
for color grading (element-
Tk made by Tangent Wave
Ltd.).
One input system
available.
Advertisement
Table of Contents
