Vivax ACP-18CC50GEI User Manual page 312

● Precautions:Be sur e to connect the indoor unit and outdoor unit at right poles.
★
Installation of panel
●
Set the panel to the indoor unit body by matching the position of the swing flap motor of the
decoration panel to the piping position of the panel to the piping position of the indoor unit as
shown in fig.4.
●
.Install the decoration panel
1、Hang the latch,which is located on the opposite side of the swing flap motor on the panel,
temporarily to the book of the indoor unit. (2 Positions)
2、 Temporarily hang the remaining 2 latches to the hooks on the sides of the indoor unit.(be careful not
to let the swing motor lead wire get caught in the sealing material.)
3、Screw all 4 hexagon head screws located right beneath the latches in approximately 15mm.(panel
39