1) ON/OFF (Fig.2)
★ Press this button the unit will start.
★ When repress the button, the unit will stop running.
Fig 2
2) Fan control(Fig. 3) (The relevant contents are shown in the figure.)
★ Press this button to change the fan speed of:
★ At the DRY mode: the fan speed will be set for
low fan speed automatically.
Fig 3
3) Temperature adjustment(Fig.4)
★ Press the temperature adjustment button
▲:For temperature increase;
▼: For temperature decrease.
(Press this button once, the temperature will be
increased or decreased by 1℃.)
★NOTE: Lock function: Press and at the same
time for 5 seconds, the set temp. will display "EE" and
shield, all buttons will sound; and repress the and
at the same time for 5 seconds, the lock function
Fig 4
6