Printing The Hardware Configuration Test Label - Intermec EasyCoder 4420 User Manual

Chapter 1 — Getting Started

Printing the Hardware Configuration Test Label

14
C d 39
You can print the hardware configuration test label to test the printer and
make sure it is operating correctly. The hardware configuration test label
lists the printer's configuration and provides information on the status of
the printer hardware. Use this label for reference when connecting the
printer to your system.
To print the hardware configuration test label
1Turn off the printer.
*
*2 Press and hold the Feed/Pause button while you turn the printer on.
The Alert and Empty/Pause LEDs blink during the printer self-test.
*3 Release the Feed/Pause button when the media starts moving. The
printer feeds out one or two blank labels and then prints the hardware
configuration test label.
*4 Turn the printer power off and then on again.
4440 Hardware Configuration
Memory Installed
Flash Storage
Image RAM
Flash SIMM
Mileage
Inches Processed
Inches Burned
Labels Cut
Printhead
Width
Dot Size
Burn Pot Setting
Hardware Options
I/O Option
Internal Option
External Option
Program
Version
Note: The hardware configuration label defines the above parameters.
Individual values vary between printers.
If you are unable to print a hardware configuration test label, see "Printer
Operation Problems" in Chapter 4.
EasyCoder 4420 and 4440 Bar Code Label Printer User's Manual
Helvetica
Helvetica Condensed
: 128 kilobytes
: 805 kilobytes
: OKB
: 2664
: 2376
: 0
: 1792
: 2.5
: 128
: none
: none
: none
: 067197
: 0.8
44XXU.010