Creating A Bluetooth Device Address Bar Code Label For The Sd61 - Intermec SF61BUG User Manual

Creating a Bluetooth Device Address Bar Code Label for the
SD61
SF61 Cordless Scanner User's Guide
Note: If your base station does not have an association bar code label,
use EasySet to create an association bar code containing the Bluetooth
Device Address of the base station (see
with EasySet in Chapter 3 for details on how to install and use
EasySet).
To get the Bluetooth Device Address of the SD61 base station
1 Connect your SD61 base station to a PC with EasySet installed.
2 Start EasySet and select the SD61 product (Product > Select >
Decoders > SD61).
3 Open the Communication > Select communication interface
window, select the interface corresponding to your SD61 base
station and click OK to confirm.
EasySet connects to the base station and retrieves the current
configuration indicated by blue check marks or blue text next to
the commands in the EasySet commands window (repeat step 3 if
the connection is not established).
4 Open the Configuration modes and utilities folder and note the
BDA string displayed next to the Get Bluetooth device address
command.
To create a BDA bar code label for your SD61 base station
1 Still in EasySet, select the SF61B product (Product > Select >
Handheld scanners > SF61B).
2 Open the Interface > Bluetooth > Quick connect/disconnect
folder double-click the Compose BT address command.
3 Enter the host's Bluetooth Device Address (BDA) you noted in the
previous procedure and click OK to confirm.
A Bluetooth association bar code is created containing the BDA of
your host computer.
You may be able to read the association bar code on the screen or
you can print it out as a label and stick it on your SD61 base
station.
Chapter 2 — Connecting the SF61B
Configuring Your Scanner
29