Troubleshooting - Intermec EasyCoder 4420 User Manual

Chapter 1 — Getting Started
Using the Front

Troubleshooting

4
C d 39
Helvetica Condensed
Feed/Pause
1
Power/Data
2
Alert
3
Empty/Pause
This illustration shows the LEDs that are on the front panel of the
Front panel LEDs:
printers. For help understanding these LEDs, see the next LED Descriptions table.
LED Descriptions
Number
* LED
1 Power/Data
2 Alert
*3 Empty/Pause
Panel LEDs
You can use the front panel LEDs to troubleshoot the printer.
LED States for Problems
Problem LED State
*Over-Temperature
If the printer overheats, the Alert LED flashes and the printer
stops. Do not try to troubleshoot or adjust the printer—just allow
it enough time to cool down and it will resume operation on its
own. You should only encounter this problem after extended print
jobs.
Media or If the Empty/Pause or the Alert LED remains on, the printer is
experiencing a media or system fault. See Chapter 4,
System
"Troubleshooting the Printer," for help in correcting the problem.
Faults
EasyCoder 4420 and 4440 Bar Code Label Printer User's Manual
Helvetica
44XXU026.eps
State Indication
*
Off Power off
On Power on
Flashing Receiving data
Off Printing or idle
Flashing Over-temperature
On System fault
Off Printing or idle
Flashing Paused
On Media fault
for