Motor Replacement - Matrix T1XE-04 Service Manual

CHaPTer 9: ParT rePlaCemeNT GUide

9.9 moTor rePlaCemeNT

1) Turn off power to the treadmill and disconnect the power cord.
2) Remove the motor cover as outlined in Section 9.1.
3) Use a hook or loop of wire to remove the spring from the drive belt tensioner (Figure A).
4) Remove the drive belt tensioner using a 6 mm Allen wrench (Figure B)
fiGUre b
fiGUre a
5) Cut any wire ties holding the motor cable to the frame (Figure C).
6) Disconnect the motor cable ground wire from the grounding post (Figure D).
fiGUre C fiGUre d
54