Russound CAA66 Installation Manual page 97

Keypad buttons removed Electrical tape over button holes and IR
845.1 placed over IR window window
You will need to make 7 CA-LCD2 keypads with button elastomer removed and
electrical tape over the area to keep IR light from bleeding into the next keypad.
Each CA-LCD2 keypad will need 12VDC connected to the 110 Punch down
connector at the rear of each keypad. +12VDC goes to the G or Green terminal. -
12VDC goes to the BW or Brown/White terminal.
CA-LRC1
Needed to test IR functions
CAA66 Test Procedure
Revised July 22, 2005
44 of 44